Traffic Light Push Button/Sensor Input Controller with Programmable Timer
$1,100.00
Manually change traffic light states from red to green or green to red via an external push button(NO)/Sensor Input(NO), programmable timer can be set to any time interval to reset traffic light back to its original state.
(push button not included, normally closed push button needed)
Assembled in Melbourne, Australia
1-2 week lead time for manufacture
Wiring
Power Input
110-240VAC IN
1: Active L
2: Neutral N
3: Earth
Traffic Light Output
24VDC OUT
4: -24VDC (Common)
5: -24VDC (Common)
6: -24VDC (Common)
7: -24VDC (Common)
8: +24VDC (Module 1)
9: +24VDC (Module 1)
10: +24VDC (Module 1)
11: +24VDC (Module 1)
8: +24VDC (Module 2)
9: +24VDC (Module 2)
10: +24VDC (Module 2)
11: +24VDC (Module 2)Push Button/Sensor Input (Normally Open)
12: NO
13: Common
Specifications
| Supply requirements | 110-240VAC Input |
| Traffic signal outputs | 24VDC, 4 x red/green, common negative. |
| Timer |
Schneider off-delay timer |
| Housing | IP66 UV Stablised Metal Enclosure, Wall Mountable. |
| Controller dimensions | 300mm (H) x 200mm (W) x 150mm (D). |
