LAPP KABEL H07RN-F - Enhanced Version, Halogen-free, Long-run submersion, UV and Oil Resistant Rubber Control Cable



Halogen-free; Long-run submersion; Bending/Loop Torsion (WTG): -40°C to +90°C; UV/Ozone resistant

  • Arrangements made of single-core, rubbersheathed cables H07RN-F can be used for short circuit-proof and short-to-groundproof installations in accordance with IEC 60364-5-52/ HD 60364-5-52/ VDE 0100 Part 520
  • More water-resistant than H07RN-F and H07RN8-F
  • Conductor temperature range more suitable for outdoor installation and wider than H07RN-F, H07ZZ-F, H07BN4-F and NSSHÖU
  • Medium, mechanical stress and industrial and agricultural use as well as for handheld and power supply devices (H07RN-F according to EN 50565-2)
  • Drip loop torsion between the nacelle and the tower of wind turbine generators/windmills
  • Outdoors acc. EN 50565-2
  • For buildings or industrial plants with a high density of people or valuable assets
Product Features
  • Oil resistant according to EN 60811-404; Good resistance to abrasion, atmospheric agents, grease and mineral oils
  • UV-, Ozone- (acc. EN 60811), Cold- (-40 °C flexible at the conductor) and Heat resistant (+90 °C at the conductor)
  • Drip loop torsion resistant (wind turbine) ==>TW-0, TW-1 and TW-2: -40 °C to +90 °C / 2,000 cycles (5,000 cycles from +5 °C)/torsion angle of +/-150 ° per metre at one revolution per minute
  • Long-time water submersion (AD8) down to 100 m without interruption (no drinking water, minimum water temperature of +5 °C, standing water only, no areas with boat/ ship/ submarine traffi c)
  • Halogen-free acc. EN 50267-2 (sub-parts -1 and -2), fl ame-retardant according to IEC 60332-1-2 and low smoke density (LS) acc. EN 61034-2
  • <HAR> H07RN-F cable type approval according to EN 50525-2-21
Cable Make-up
  • Strands of bare copper wires
  • Core insulation: special rubber
  • Outer sheath: special rubber compound

Click Here for PDF Data Sheet