LAPP KABEL ÖLFLEX® CLASSIC 110 Black UV and Weather Resistant PVC Control Cable

LAPP KABEL



LAPP KABEL LOGO

VDE-registered oil-resistant PVC control cable with black outer sheath for a wide range of applications

Application
  • For fi xed installation as well as occasional flexing at free, non-continuously recurring movement without tensile load
  • Dry or damp rooms that are subject to medium mechanical loads
  • Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG)
  • In power chains for a travelling distance up to 5 m and 0,2 ... 1 million bending cycles, for following dimensions: 0,5 to 2.5mm² and 2 to 7 conductors
Area of use
  • Suitable for outdoor applications
  • UV Resistant

Technical notes
  • Flame-retardant according IEC 60332-1-2
  • Good chemical resistance
  • Oil-resistant according to DIN EN 50290-2-22 (TM54)
  • UV and weather-resistant according to ISO 4892-2
Approvals
  • VDE reg. no. 7030 for the following sizes:
    up to 2.5 mm²: 2 - 65 cores
    from 4 mm²: 2 - 7 cores
    from 25 mm²: 2 - 5 cores
Cable Make-up
  • Fine-wire strand made of bare copper wires
  • PVC insulation LAPP P8/1
  • Cores twisted in layers
  • PVC outer sheath, black (RAL 9005)

Click here for PDF Data Sheet

Give us a call on 03 9314 7877 for a quote